The external cooling of the synchronous Dalian motor casing is mainly air cooling, and the air circulation is usually driven by a fan. The external cooling methods mainly include natural cooling, self fan cooling, and other fan cooling methods. The natural cooling motor of permanent magnet synchronous motor does not have a special cooling device. Due to limited heat dissipation capacity, only the radiation on the surface of the parts and the natural convection of the cooling medium carry away the heat generated by the motor.

In humid environments, ordinary motor casing materials are prone to corrosion and rust, and the waterproof performance of the motor depends on the protection of the casing. After the motor is eroded by water, it can lead to unstable use or motor scrapping, so the waterproof shell of the motor is very important.

What factors affect the surface roughness of Dalian motor casing

1、 The selection of cutting tools varies depending on the material of the workpiece, otherwise the machining performance of the cutting tools will not be perfectly reflected or even have no machinability.

2、 The size of the feed amount, in order to ensure good surface roughness, precision cutting, and feed speed are usually very slow.

3、 In order to achieve better surface roughness requirements, the selection of rotational speed for precision machining of motor shells usually requires a higher rotational speed. This way, the inner wall of the processed motor shell will be smoother and brighter, resulting in better roughness.

The voltage to ground caused by the distributed capacitance and insulation resistance of the electrical appliance itself. At this point, the human body feels a slight numbness when it touches the metal shell, but it cannot be felt when the hand is pressed tightly against the shell. The way to prevent the electrical casing from being electrified is to connect the electrical casing to a reliable grounding wire.

Due to the differences in protective effects and service life of different motor casing materials, a reasonable selection tailored to local conditions will be more reliable, which is naturally the basis for consumer acceptance. In the process of selecting products, we still need to pay more attention to their quality in order to achieve good results in use.