As the key component of the electric motor, the processing process of the Dalian motor shell not only plays the role of a steel warrior, but also the outer garment of the motor. Why is the motor shell a steel warrior? It is very simple, because the material of the motor shell itself is usually all steel, it can reasonably avoid the damage caused by the deformation of the support of the motor, so why is it also the outer garment? Because all goods are equally good, The outer packaging box is also very important. A beautiful and user-friendly motor casing not only makes the motor look beautiful but also makes it easy to use.

The motor casing is mainly used for maintenance of the motor, so the quality of the motor casing is very important. In daily applications, we need to maintain it well. Firstly, the natural environment should be kept dry and the surface of the motor should be kept clean and free from dust, chemical fibers, and other obstacles. The water-cooled motor casing should ensure excellent lubrication of the motor during operation. A typical electric motor operates for 5000 hours, which means that the lubricating grease should be filled or replaced. If the bearing exceeds the temperature or if lubrication is found during operation, the hydraulic press should immediately lubricate the grease.

Is it normal for the Dalian motor casing to be hot

It is normal for the motor casing to be hot. But the height should not exceed 85 degrees Celsius.

If the temperature of the motor casing rises too fast, it may be a common fault. The common faults of hot motor casings include: damaged rolling bearings (which can be distinguished by sound at low speeds), mild short circuit faults in electromagnetic coils (which can be distinguished by measuring the balance of three-phase current), and broken motor rotor bars. (At this time, there is also an imbalance in three-phase current, but the detailed condition of the motor casing requires unique instruments and equipment to accurately measure.) Sweeping the bore (the axis management center is offset, related to rolling bearings). External cause of hot motor casing: phase failure. Or a certain phase is loose, etc.

If the grounding wire of the motor casing and the resistor of the transmission line are not large, it is equivalent to the potential difference between the motor casing and the ground, and it is not easy for people to touch the motor casing for shock resistance. In fact, a motor has severe leakage, such as the collision between the stator winding and casing of the motor. Due to the road surface, the short-circuit capacity is very high, and the motor of the relay protection device equipment may melt and disconnect the switch power supply, causing the motor to terminate. The casing of other electrical equipment must also be on the road, and the basic principle is the same.

Cast iron motor casings are likely to have higher durability, withstand impact and impact, and have high mechanical strength. However, it must be acknowledged that due to their heavy weight, non corrosion resistance, easy rusting, and difficulty in heat removal, they are inferior to aluminum profiles. However, in terms of electrical performance, whether the motor casing is cast iron or aluminum profile, it is the same here. Generally, the leakage current of the motor cannot exceed 0.8 meters A to ensure personal safety.